Utilizing a high performance L series pump, an option to select the type of tank, float switch and pressure gauge have been provided to meet various lubrication requirements. These units, used for centralized lubrication, also possess an added benefit of a cooling effect by continuously supplying lubricants to the point of application.
Further options such as an outgoing check valve, line filter, magnet filter and micro-separators, can be attached to the unit.
Resistance type motorized pump unit, available in various cycle times with adjustable output volumes. 2 discharge volume types available, dispensing an adjustable discharge amount of either 1c㎥3～3c㎥ or 3c㎥～6c㎥ of oil. The adjustable discharge volume further improves the pump’s efficiency.
The SMD model is a resistance type cyclic pump possessing a quick attaching / detaching tank, terminal board and a supply strainer as standard options.
The SSMA model is a cyclic pump based upon the SMD model, possessing the same motor and mechanisms. However, the SSMA is far more compact with a 1L plastic tank, allowing the unit to be installed in areas where space is limited.
2 fixed discharge volume types are available, dispensing either a set volume of 2c㎥ or 3c㎥.
Utilizing an IC timer, the MY6 can be set to discharge oil from a range of selectable interval times. Possessing an “adjustment nut”, the discharge volume per cycle can be set between 1～6c㎥.
The maximum discharge pressure for any discharge volume setting is 0.5MPa.
The MV motorized pump units are designed to continuously lubricate within a resistance type system. Unit can be supplied with a 2 liter aluminum or plastic tank.
The LA model is a simple to use hand pump. Distribution of oil is induced by the direct force created upon pulling the lever.
3 types of LA hand pumps are available, dispensing either 3c㎥/stroke, 6c㎥/stroke or 8cm3/stroke, and are ideal for use in conjunction with Dester Valves (Resistance type distribution junctions).
Distribution of oil is induced by simply moving the lever up and down. The HLA7 model has an adjustable dispensing volume of 1c㎥/stroke to 7c㎥/stroke, which can be set by adjusting the adjustment nut and stopper positioned next to the lever.
